Handprinted Studio 2017

2017 has been a busy year in the Handprinted Studio! We’ve been visited by amazing tutors including Ian Phillips, Laura Boswell, Sue Brown, Tom Boulton,
Karin Moorhouse and Nick Morley, all teaching some of their signature techniques. We can’t wait to have these (and more!) tutors back next year

One of our most exciting ventures was the Tea Towel Print Exchange!
Lots of tea towels were printed and sent to us, swapped around and then a random selection of tea towels were posted back to each participant. We saw
some incredible prints and raised lots of money for WaterAid – thank you to everyone who took part!

We hosted our first Makers’ Market with great success at
the beginning of December where 20 local makers sold their handmade wares. We’ll be looking to host another of these events in 2018!

This year we’ve started our Open Access Thursdays and as a result have had the pleasure of seeing lots of wonderful artists use our studio space and printmaking
equipment.

All that and a packed schedule of workshops and classes –  it’s been a busy year! Next year’s workshop timetable is filling up so book yourself a space now while they’re still available.

Take a look below at a small collection of some of the wonderful work made at our Handprinted Workshops this year:

Book yourself into a Handprinted Workshop here! 

Meet the Maker – Lucie Summers

 

Hello there! My name is Lucie Summers, I’m a printmaker and I live on a farm with my husband and two boys near Newmarket in Suffolk. I mainly design and
print small panels of fabric for other crafters and makers to use in their work. I also create paper collages and make quilts for exhibitions.

 

Describe your printmaking process.

I have a few different ways of working, but generally I like to experiment with making marks with black ink – either using drawing pens or paintbrushes.
I scan the design into my computer and use Photoshop to move and clean things up, then I can print out the design in the correct size for making into
a screen. I currently make screens using a Thermofax machine, it’s quick and easy, but it’s expensive and now the screen mesh is being discontinued which is a bit of a disaster! I’m slightly burying my
head about the situation, but I really need to experiment with new ways of producing screens. At the moment, I’m thinking of using the screen fluid
and screen filler method.

 

How and where did you learn to print?

I learnt to screen print during my A level textile course. The class had to design and produce the costumes for the school production which that year was
‘Bugsy Malone’. My job was to design a motif for Dandy Dan’s gang, who was played by my then boyfriend Sam (now husband! Yes, we’ve really been together
that long!) I produced the yardage for waistcoats for the gang in different colours with a dollar sign motif, heavily influenced by the Pop Art movement.
I loved every minute of that project and once I was at art school in Norwich, I spent my days down in the basement happily printing lengths of cloth,
listening to Mark and Lard on Radio One (which has just aged me….!)

 

Why printmaking?

I love printmaking, and I also like making collages and quilts and I think all three practices help inform each other. It took me ages to realise this;
I thought I was flitting around not able to settle on one thing until recently I’ve realised that once I’ve made prints by whatever means onto paper
or fabric (either screen printing or monoprinting) I then use those papers to create collages…which in turn are useful exercises to help me design
interesting quilts…which then helps me create interesting textures for fabric design. And so it goes full circle.

 

Where do you work?

I work from a lovely large space in our farmhouse which was the old kitchen of my husband’s childhood home. It’s got light from 3 aspects so it’s a really
nice space to work in. I’m terrible at keeping it tidy though, there’s stuff everywhere! 

 

 

Describe a typical day in your studio.

My working day is typically quite short once I factor in the school run which is an hour round trip. I answer emails while eating my breakfast and then
I usually sneak in a bit of baking (I’m obsessed) I usually spend mid morning printing orders for my Etsy shop so they can be sent out in the afternoon.
Sometimes I work with other companies, so after lunch I work on the computer polishing up designs for them. The most recent collaboration has been
with a local company who make covers for mobile phones and I’m really excited to see the results. I like to go for a decent walk with the dog mid afternoon
to clear the cobwebs, and I take the post with me to pop into the village postbox. I walk across the fields which I find really inspiring so I like
to think of it as ‘design planning’ time. As soon as I’m home I’m out of the door to get the boys from school. I like to design in the evenings, so
I can sit and chat to my husband at the same time. I think when you work at home, you tend to fit jobs around your daily life. I don’t have a routine
as such, but I’ve found what works for me and fits in around my family.

How long have you been printmaking?

Apart from the work I did at school and art collage, I’ve been ‘properly’ designing and printing fabric panels for my Etsy shop since 2008 so next year is my 10 year printmaking anniversary!

What inspires you?

I’m inspired by everything I see. A crack in a pavement, the way the top of a tree meets the sky, an unintentional splatter of paint on a fence. I walk
everyday with the dog and am really conscious of the changing seasons, of the leaves and buds in hedgerows and the marks made in the soil by the farmer.

 

 

What is your favourite printmaking product?

My newest toy is always my favourite, and so at the moment, it’s my Gelli Plate.
I’m so in love with it! When I’ve got a few spare minutes I play with it some more, and it’s super easy to clean up. I made all of my Christmas
cards with it this year and they look really good. I’m hoping for the really big one for Christmas, I’ve dropped enough hints!

 

 

What have you made that you are most proud of?

Many years ago, I made a quilt which I called ‘Portholes’ using lots of my screen printed fabrics. It was created using a reverse appliqué technique
that hadn’t really been used in quiltmaking before and it got a huge amount of attention. It’s really funny, because the technique itself is now
called portholes, and I see lots of quilts on Instagram where it’s described as being made ‘using the porthole technique’. Portholes won first
prize at The Festival of Quilts in Birmingham and it sort of ‘launched’ me into that world. I’m pretty certain that quilt helped me secure the
design gig with Moda Fabrics (I designed two collections for them) and also helped bring me to the attention of the folks at F&W Media who
asked me to write a book, which is called ‘Quilt Improv’. When I look at the quilt now, I can’t believe I actually made it, so it’s definitely
my proudest creation.

 

 

Where can we see your work? Where do you sell?

I sell online, in my Etsy shop, which is called Summersville. (summersville.etsy.com)
As well as fabric panels that are sold to other creatives, I’ve a selection of ready made items such as fabric covered sketchbooks, notebooks,
purses, pouches and phone covers!

 

 

What will we be seeing from you next?

I’m hoping to have the mobile phone covers in my hot little hands as soon as possible, and I’ve also designed a wallpaper for an Italian company that’s
going to be launched in January in Paris at Maison et Objet which is super exciting!

Do you have any advice for other printmakers and creatives?

Experiment, play, make stuff. Do it again, and again and again. Show it on social media, gain feedback and make some more. Keep your eyes open and
be inspired by everything you see.

 

 

I am @lusummers on both Instagram and Twitter and my Etsy shop is summersville.etsy.com

 

 

 

 

 

 

Easy Block Printed Christmas Wrapping Paper

With our Christmas Makers’ Market and our Christmas Fab Friday Workshop on last week, we’ve been getting in the festive spirit here in the Handprinted
Studio. Our Fab Friday workshoppers printed sheets of wrapping paper that would add charm to any present. Here is a quick design we whipped up for
the occasion that can easily be made for your gifts this year!

Using one sheet of Easy Carve,
we carved four bauble shapes. First, the designs were drawn in permanent marker on the Easy Carve. We then used the V tool from the Japanese Cutting Tool Set to carve around the outside of each bauble as well as to add some patter to the surface of each shape.
Using a scalpel, it is easy to cut the shapes out, following the line of your V gouge all around the edges. For more pictures showing a similar method
of carving, see our Block Printing on Fabric blog post

Cranfield Water Based Block Printing Inks were perfect for this project. The inks dry quickly on the paper and the colours are bright and strong. This magenta ink was used straight out of the
pot for our first colour. Only get out a little ink onto your plate at a time as water based inks can dry quickly. You can add a little extender or
drying retarder if you like. Roll out a small square of ink in a thin suede-textured layer.

Draw a line along the width of our blank wrapping paper on which the baubles will hang (see below picture).  Choose your first bauble and roll
evenly with your first colour. 

Place your bauble face down on your paper and press firmly all over the back. 

Continue to scatter your pink baubles along the line. 

When you have printed enough of the first bauble, ink up your second bauble using your second colour. This colour is Cyan mixed with Magenta. If your inks
have gone a little dry on your plate, liven them up with a little extender. 

Continue to print your baubles on your wrapping paper in this way, alternating colours and patterns. Sticking to one colour for each bauble prevents faffing
around with cleaning. 

When you’re finished, simply clean up your inks with soap and water and get wrapping!

To make this wrapping paper you will need:

CHRISTMAS MAKERS’ MARKET

We are very excited to be hosting our very first Christmas Makers’ Market! We’ve got a brilliant selection of makers selling a huge variety of handmade
goods including framed artworks, glass, homewares, clothing, dolls, stationery, cards and Christmas decorations. The Makers’ Market will be open on
Friday 1st December from 6-8.30pm and on Saturday 2nd from 10.30-5pm. Entrance is free – please pop in. There will also be live printmaking demonstrations
to see! Here’s a sneak peak at who will be there: 

 

Anna’s Drawing Room – Anna makes beautiful nature-inspired prints and cards.

More about Anna’s Drawing Room

 

Catherine Tiley – Cathy screen prints unique tote bags using paper stencils and will also be selling cards.

Moe about Catherine Tiley

 

Roly Designs – Georgina makes beautiful patchwork tree decorations, Christmas stockings and cushions as well as pen and watercolour cards.

More about Roly Designs

 

Lesley Ormrod – Photographer and printmaker Lesley will be bringing cards, calendars and both framed and unframed prints.

More about Lesley Ormrod

 

Tom Boulton – Letterpress printer & typographic designer Tom Boulton will be bringing a variety of hand printed letterpress cards and stationery.

More about Tom Boulton 

 

We are Mountain – Sophie’s unique and vibrant prints, tea towels, cards and magnets will be available for sale!

More about we are mountain

 

Geraldine Leal – Artist/sculptor Geraldine will be selling framed photographs and prints as well as pom poms and small sculptures. 

More about Geraldine

 

Sue England – Sue’s uniquely printed sketchbooks will be available for sale as well as a selections of screen and Japanese woodblock prints.

More about Sue England

 

Alison Stewart – Alison’s beautiful work features local maps transcribed into textiles. 

More about Alison Stewart

 

Barbara Lammas – Barbara will be selling transfer printed cards and scarves using natural forms. 

 

Claire Fenner – Stock up on your Christmas wrapping essentials with Claire’s cards and present tags.

 

Erin Tyrrell – Browse through Erin’s cards, prints, crochet and handmade ornaments for the perfect gift.

 

Holly Newnham – Holly will have a selection of hand printed lampshades, cushions, cards, prints and gifts available for sale. 

More about Holly Newnham

 

Lin Crompton – Lin’s bringing along her amazing handmade dolls, scarves and Japanese knot bags.

 

Pomilly –  Millie makes a range of t-shirts and other clothing illustrated with embroidery and crochet as well as patches and brooches
often with a humorous gaze on the human body.

More about Pomilly

 

Artworks – Nancy from Artworks creates beautiful fused glass Christmas decorations, plates and bowls, framed art and decorative pieces.

 

Helen Simmans –  Helen will be selling a selection of beautiful glass coasters place mats and key-rings.

 

Mitmakes – Mitka hand-makes unique textile and leather pieces to wear and for the home with original fabric designs. 

More about Mitmakes

Please come along to our Christmas Makers’ Market this Friday 1st December from 6 – 8.30pm and Saturday 2nd December from 10.30am – 5pm at Handprinted,
22 Arun Business Park, Shripney Road, Bognor Regis, PO22 9SX. 

See you there!

Screen Printing: The Ultimate Studio Guide – Book Giveaway!

We were really excited to hear that Print Club London were bringing out a book on screen printing. ‘Screen Printing: The Ultimate Studio Guide from Sketchbook
to Squeegee’ is a complete screen printing manual that covers everything from designing, through a huge variety of screen printing techniques to setting
up an exhibition. Each chapter focuses on a different printmaker and gives a step by step guide to one of their signature techniques. We’re giving
one copy away to our lucky winner at the beginning of the new year – click here to enter!
This competition closes on the 31st December. 

For a chance to win a copy, enter here

 

Meet the Maker – We are Mountain

I am Sophie Mutter a printmaker living in Worthing. After graduating from a photography degree at Nottingham Trent University in 1997, I went on to have
a successful career on the picture desk of OK! Magazine. I loved the celebrity world but was always drawn to the sea, and in 2013 finally took the
plunge and left London for Sunny Worthing. Once here I set up We Are Mountain, creating seaside influenced screen prints and linocuts, turning them
into cards, fridge magnets and tea towels. Being able create artwork in my workshop by the sea and freelancing at magazines in the big smoke, means
I have the very best of both worlds!

 

Describe your printmaking process.

 I start with a photograph. My favourite places for inspiration are the seafront here in Worthing and also the Booth Museum in Brighton.
I work on the photograph in photoshop to break it down into layers, which I then screen print.

How and where did you learn to print?

 I did a tiny amount of printmaking, mainly linocuts, at school and on my art foundation course, but learned how to screen print
on a brilliant course at Westdean Collage with Jane Sampson in 2014.

 

Why printmaking?

 I was drawn to it mainly because you don’t have to rely on being able to draw well (I’m rubbish at drawing, sadly!) I love the way
you can combine photographic technique with a more artistic approach to create a piece of work.

Where do you work?

 I work on my images at home, and then use the open access studio at Inkspot Press in Brighton.

 

How long have you been printmaking?

I’ve been screen printing for almost four years.

What inspires you?

I find living by the sea hugely inspirational, I’ve always been drawn to the sea – before I moved to Worthing I lived in Harrow in North West London…
but the decor inside the flat was decidedly nautical… I think living by the sea was meant to be!

 

What is your favourite printmaking product?

 I mainly use Speedball Screenprinting Inks. 

Where can we see your work? Where do you sell?

 I sell my work at Inspired By The Sea, the Worthing Museum shop and
Flowers4 in Worthing,
The Jerwood Gallery  shop in Hastings, The Bureau of Change in Southsea, The Art House in Southampton, The Green Tree Gallery at Borde Hill Gardens and online on Etsy, Folksy, Buy The Sea and MicroMkt. I am also
selling at a few Christmas Markets including the Handprinted Makers’ Market!

What will we be seeing from you next?

 The Booth Museum has just acquired the most wonderful taxidermy cheetah (created by ethical taxidermist Jazmine Miles-Long). I have
just started work on a print from photographs I took last week.

I am also planning more full colour tea towels and hopefully fabric that will be made into cushion covers.

 

Do you have any advice for other printmakers and creatives?

 I’m very new to printmaking, so not sure what advice I could give, apart from there is no right or wrong way of approaching your
work, and if you’ve never tried screen printing before, give it a go, it’s brilliant!

Keep up to date with Sophie and her work on Etsy, her website and instagram

 

 

 

 

 

How to Screen Print with Paper Stencils

In this project we will show you how to screen print onto paper using paper stencils. With this method, you can print multiples of your designs in several
layers of flat colour without having to make an exposed screen or using screen filler. When screen printing, ink is forced through a fine mesh onto
a flat surface. A paper stencil will block areas of the paper from receiving ink, creating your design. When using a paper stencil, you should be able
to get 10 – 25 prints made before the stencil starts to deteriorate. 

Standard copy paper works best for paper stencils. It is thin enough to achieve sharp edges but strong enough to block the wet ink. Acetate stencils, although
washable, can slip and ink can get underneath them. Trace your drawing into your separate parts. Each stencil will be printed in a different colour.
This design is being printed in two colours. When making a screen printing stencil, not all the parts have to be connected – you can have ‘islands’
that you put down in the correct place before printing. 

Use a scalpel and a cutting board to cut out your stencils.

If your stencils are comprised of different cut out elements, like these ones, use allows and pencil marks to help you line up the different pieces so
that they don’t get twisted and misaligned when laying them down. 

Next, prepare your screen. A 90T mesh screen is best for printing onto paper. We are using an A3 sized screen with an A4 stencil in the centre. Use parcel tape on the front and back of the screen to block the mesh around the edges. You want to leave an opening that is smaller
than your stencil but allows your whole design to fit inside. Tape the back of the screen in the same way, sandwiching the mesh between the two layers
of tape. 

Hinge clamps are an easy way to print a registered (lined-up) image and to print multiples of one print. These hinge clamps are attached to a board. The screen
is held in the clamps and can be lifted up and down on the hinges. Each time it is placed down on the board it is in the same position. 

Place your paper down on the board and your stencil on top. If using hinge clamps, put your screen down on top to make sure your whole design fits within
the opening. 

It can help to spray a little low-tack spray mount down on your surface to hold your printing paper in place and stop it from sticking to the screen. Mark
the location of the corners of your paper with masking tape. That way you can place each piece of paper in the correct place.

Acrylic screen printing inks are used for printing onto paper. You can make your own acrylic inks by mixing acrylic paint with System 3 Acrylic Screen Printing Medium in a 50:50 ratio. If the proportion of acrylic paint is too high, the paint will dry
in the screen and cause permanent blockages. You can make the colours more translucent by adding more medium to the mix. 

If using hinge clamps, lift the edge of your screen and prop it onto something like a roll of tape. This holds the screen away from the paper whilst you
flood it. Scoop a line of ink along the bottom edge of the opening of your screen. 

Use a squeegee that
is slightly wider than your design. Hold your squeegee at a 45 degree angle away from you to drag the ink up the screen. You don’t need to press hard
at this point. This is called a flood. If you prefer, you can place your ink at the top on the screen and flood down the mesh instead of up. 

The holes in your mesh should be filled with a thin layer of ink. If there are any patched left open, flood again. 

Remove your chocks and place the screen flat on the board. Holding the squeegee at a 45 degree angle towards you, pull the squeegee down the screen. You
need to press firmly and should hear a sound resembling a tent zip. You do not need to add any more ink for this squeegee pull, we are just pushing
the ink from the flood through the mesh and onto the paper. 

Carefully lift your screen to reveal your print. The ink should have stuck the paper stencil to the screen.

Place the next piece of printing paper on the board using your masking tape corners as a guide. Once you have started printing, your ink is at risk of
drying in the screen so you will need to work fairly quickly between prints. Once you have finished this layer, peel off the stencil and use a wet,
soft sponge to clean the remaining ink off the screen. 

When your first print layer is dry, place a print onto your board. Put your second stencil over the top of your print, lining up the different elements.
Check your screen is dry and that your whole design will fit in the opening when it’s placed down. 

For this second layer we are using a pre-mixed Acrylic Screen Printing Ink by Speedball in Gold. Pre-mixed inks do not need any medium added. Lift your screen slightly and flood
with the second colour. 

Place your screen down and pull the squeegee down the screen, pressing firmly. 

Life to reveal your two layer print! Print the rest of your edition using the same method and then peel off your stencil and wash the screen thoroughly. 

To make a paper stencil screen print you will need:

Meet the Maker: Cath Bristow

Hello, I am Cath Bristow, a Brighton based printmaker. I use my printmaking practice to work in community engagement and outreach, facilitating printmaking
workshops across the South East with children, young people and adults within different community settings.

 

I have my own printmaking practice and my community printmaking practice and the two are inextricably linked. Facilitating the different needs, abilities
and emotions within a group workshop can be both mentally and physically exhausting and to balance this my own practice gives back to me and helps
to refresh my energy. Often working with a group will spark an idea that I might take forward into my own work and sometimes a technique that I have
developed within my own work I will take into my community practice, so the two go hand in hand.

 

Describe your printmaking process. 

For the last 6 years I have been working in Collagraph. I begin with a drawing but this is the starting point and often as I make the plate the idea will
change and develop. For me it is important to be flexible and not stick too rigidly to a plan or drawing as this leaves room to also work spontaneously.

Using mount board as the base I use a combination of shapes that I cut from thin card and incised lines and areas that are cut from the mount board. Sometimes
I add a little texture by using textured wallpaper, lace, or carborundum. I play around with the layout and arrangement of the shapes and textures
then glue them to the mount board base

To ink up the collagraphs I use the intaglio process of inking and wiping for the incised lines and then I ink the raised card areas with a roller like
a relief print. This is very messy and I always have lots of clearing up to do! Finally I print the plate onto dampened Fabriano paper on a beautiful
Rochat etching press at bip Art printmaking studio in Brighton. Sometimes I make 2 plates
that are registered and printed on top of each other as in my print called “out of the shadows”:

How and where did you learn to print?

I feel like I am learning new things about printmaking all the time! I was introduced to screen print onto fabric and relief print over 30 years ago on
my Art and Design Btec course. I went on to study for a degree in Art and Social Context at Dartington college of Arts in Devon. The course was all
about honing your practice and stripping it back to create an accessible practice to take out and work within a community context. I developed a real
love of low tech printmaking and experimented with cut paper stencil screen print, overprinting and simple block making on paper and fabric. Following
this, I moved to London and began working with Cloth of Gold (now Social Fabric), an
Arts organisation working on collaborative print projects within schools, museums and galleries, working with lots of different simple but effective
printmaking techniques all of which after all these years we are still using with groups on a daily basis.

 

I have been lucky enough to work with some very skilled printmakers. I am always keen to keep upgrading my printmaking skills and over the last few years
have taken courses in Traditional etching, Collagraph and Zinc plate lithography at bip-Art printmaking in Brighton.

Why printmaking?

The satisfaction of seeing the print develop. Printmaking has so many stages to go through to produce the end result. Moving from the idea, the sketch,
to the translation into the plate, block or stencil, working out what will print, which way around, deciding what elements to keep, how different textures
might print. The element of chance and surprise that printmaking offers. The possibilities of exploring colour and how this impacts on the mood of
the finished print. And I am sure I speak for a lot of printmakers here, I love the surprise element of printmaking and never tire from the excitement,
anticipation and magic of lifting the screen or plate to reveal the printed work.

Why printmaking in community? Passing on the love of printmaking to more people!

 

Where do you work?

Different places every day, like a printmaking nomad! Could be a community centre, a school, an Art gallery or most recently Chichester Cathedral. I teach
short courses in Printed Textiles at bip-Art printmaking in Brighton. I work with Social Fabric who specialise in collaborative printmaking and participatory projects with young people and adults across the South East. Over the last 4 years I
have worked increasingly developing printmaking workshops within Mental Health and well-being.

I create my printing plates, stencils, experiment with print ideas, mix inks and prepare materials in a studio that I share with a lovely group of makers
in Brighton. I am a member of bip-Art printmaking studio and Screen-art Brighton where I use the presses and facilities to print my work.

How long have you been printmaking? 

I have been leading printmaking workshops for the past 20 years and have been developing my own printmaking practice for the last 15 years.

The first printmaking job I did was t-shirt printing on a play scheme for my local community arts team in Lancaster when I was 19. During this summer I
worked with Social-Fabric, printing t-shirts with young people from the Grenfell community and I thought wow! here I am printing t-shirts 30 years
later and I still love it!

What inspires you?

The power of creativity. Going into a space with a group of young people or adults with blank paper, cloth or t-shirts, most of them having no previous
experience of printmaking and at the end of the session those people leaving with an amazing, colourful, individual collection of prints that they
have created -that is very inspiring!

What is your favourite printmaking product?

A squeegee, a
screen and newsprint have served me very
well!

Caligo oil based water washable ink,
often I am working on a tight budget but even if people are making blocks out of polystyrene pizza trays or cereal boxes they always look really professional
when they are inked up and printed with good quality ink.

Where can we see your work? Where do you sell?

www.cathbristow.co.uk

http://www.social-fabric.co.uk/

http://www.bip-art.co.uk/

I sell my own work from my studio,with bip-Art printmaking at the Affordable Art Fair in Battersea and through artist open houses during the Brighton festival
every May.

What will we be seeing from you next?

more fun printmaking projects and workshops hopefully! Over the last 6 months within my own printmaking practice I have been going back to explore screen
printing on paper, so hopefully more screen prints too! I have also worked in collaboration with Brighton-based upholsterer Kiki Voltaire to create a series of limited edition hand screen printed noticeboards.

Do you have any advice for other printmakers?

Join an open access printmaking studio. It is inspiring to work alongside other printmakers. It is great to have access to professional presses, rollers
and a dedicated print studio. It is a really positive experience to work in a collaborative space with others absorbed in their creative processes.
At bip-Art printmaking we have a range of members, some who have just left 6th form college and others who are in their eighties and have been printmaking
for most of their lives. There is a fantastic spirit of generosity within the studio, printmakers sharing their knowledge and tips, making connections
and developing exhibition opportunities with each other.

See more of Cath Bristow’s work on her website.

 

20:20 Print Exchange – Handprinted’s entrants

This year 20 members of the Handprinted studio are submitting work to the 20:20 Print Exchange. The 20:20 Print Exchange is an exchange organised by Hot
Bed Press in Salford. Each participant has to print an edition of 25 prints that are 20cm x 20cm. There are approximately 500 artists that take part
from around 40 studios. Each participant receives a box of 20 prints that includes one of their own and 19 randomly selected prints from other artists.
The participants can print with whatever method they wish. Below are the prints from the 20 artists from Handprinted. What a fantastic selection! For
more information about the 20:20 print exchange please click here

Top left: Holly Newnham – Screenprint

Top right: Debbie Moran – Two block Linocut

Bottom left: Phil King – Linocut

Bottom right: Anna Vartiainen – Screenprint

 

Top left: Lila Das Gupta – Drypoint

Top right: Martin Jones – Hand drawn screenprint

Bottom left: Judy Williams – Screenprint

Bottom right: Caroline Whalley – Acid etched copper plate and drypoint 

Top left: Jan Harbon – Screenprint

Top right: Trevor Ingham – Wood Engraving

Bottom left: Lesley Ormrod – Screenprint

Bottom right: Tom Boulton – Letterpress

Top left: Diane Palin – Woodcut

Top right: Tricia Johnson – Papercut screenprint

Bottom left: Rebecca Palin – Linocut

Bottom right: Barbara Lammas – Screenprint

Top left: Shirley Scott – Screenprint

Top right: Gillian Collins – Screenprint

Bottom left: Fabiola Knowles – Reduction linocut

Bottom right: Sue England – Screenprint

Meet the Maker: Tom Boulton

Tom Boulton will be teaching Letterpress in the Handprinted studio starting at the end of October! You may also have seen Tom in the Handprinted shop if you’ve popped in to say hello. 

I’m a typographic designer who started buying letterpress machines and type about 10 years ago. I design and print artwork, stationery and products that
are unique and affordable. I have my own line of products, I also do commission design and print work for individuals, independent shops and galleries
as well as larger organisations. Over the years I have worked on commissions and run events with a number of different groups including Tate Modern,
Southbank Centre, Design Museum, Fortnum & Mason to name a few.

 

 

Describe your printmaking process.

 

Letterpress is a puzzle and a constant battle. It goes – I have an idea in my head that needs to be printed, I then have the limitations of the typefaces
I physically have in the point sizes they are, I have a chase they have to be locked out in, that all then goes into the machine to be printed
one colour at a time. During this process I have to be very flexible to allow the type to design and form itself, to let everything balance, to
give the print the correct feel and desired effect, whilst bearing in mind what the end product is and how it will be made. When I start I often
have an idea in my mind but in the end the design often looks nothing like my original concept.

 

 

How and where did you learn to print?

 

I have always loved printing and making things with my hands. I did not start letterpress printing until I finished my degree at London College of
Printing and realised the potential that letterpress has for mass production of real prints. So I started by purchasing an Adana 8 x 5 and got
my first commission (to design and print gift certificates for a shop). After printing them I realised that an Adana was not enough for what I
wanted to do! So I started to buy more machines and type, then I started teaching myself how to print, how to get different effects and how to
make different products, then find its application in the modern world.

 

 

Why letterpress printmaking?

 

It was a really simple thing, I really enjoyed print making, I love machinery and engineering and there was a need and a gap in the market – letterpress
offers mass production for the individual whilst at the same time allowing the ability to control what you do and how you make it, you can pull
real prints – to produce real products that have soul that can be sold for an affordable price – it means I don’t have to go down the route of
producing one real print then having to get it digitally reproduced to be able to sell one – I really don’t like digital copies.

 

 

Where do you work?

 

I work from my office at home (for designing and office work) and I have a main workshop in Bognor Regis (for printing).

 

 

Describe a typical day in your studio.

 

I don’t really have a typical day in the workshop – I tend to have a very long to do list and just go at it and get on with it! The nature of what
I do means that there are a lot of different elements and things that need doing day to day – whether that is printing, creasing, book binding,
restoring machines, updating the website, planning an event, packing up orders, doing running repairs, meeting clients, designing new products.
It’s good because each day is different but it really is a very long list!!!!!

 

How long have you been printmaking?

 

I have been professionally printing for around 10 years.

 

 

What inspires you?

 

I don’t really find inspiration in a lot of current design. I find it much easier to be inspired by the weird things I collect – I really like old
packaging, strange colour combinations, old 50’s life style magazines, Typefaces on sheet music, retro computer gaming. I recently became a father
for the first time – it has be very inspiring to watch a little person grow and see the excitement she gets when seeing things for the first time,
it makes you look at things in a different way which is great.

 

 

What is your favourite printmaking product?

 

Letterpress printing is one of those weird processes that means I do not really need to buy much to print with – apart from a lot of low odour white
spirit, recently I tried Zest-it as an alternative to white spirits for when I’m doing workshops or pop up printing away from my workshop (where the
smell of white spirit is not popular!)

 

 

 

What have you made that you are most proud of? 

 

I feel very proud of the process itself and the work that has gone into restoring my machines, most of which were going to end up being sold for spares
or just scrapped. I think for anyone who restores machinery you feel strangely bonded to a machine at the end of process, you develop an understanding
for the amount of time others have spent engineering it. In my case an era when engineering was very basic and raw (most of my machines date between
1880’s – 1950’s) each time I use a machine there is a sense of pride. 

 

 

 

Where can we see your work? Where do you sell?

 

I like to take part in exhibitions, and I sell to a number of shops across the UK from small independents to museums, galleries and to larger shops.
If it looks like a letterpress print turn it over, if it is mine it will say my name on it. I also sell direct through etsy (TypeTom).

 

 

What will we be seeing from you next?

 

More printing, More Machines, More Workshops, More Products, More Stuff & Definitely some road trips!

 

 

Do you have any advice for other printmakers and creatives?

 

Do it and enjoy it. To have a creative output is a privilege and it should not be broken down and dissolved with overly concerning yourself with the
real world or what other people expect or want. Find your own voice and do it your own way.

See more of Tom’s work on his website, on Instagram or get your hands on some of his prints via Etsy.

To book a place on Tom’s Introduction to Letterpress Workshop starting at the end of October.